Приймальна комісія: тел: +38 (056) 746-27-21 , +38 (096) 651-73-94 [email protected]
Select Page

DEPARTMENT OF COMPUTER-INTEGRATED TECHNOLOGY AND AUTOMATION 

 

The staff of the Department includes 16 people as of 2019. They are 2 doctors of technical sciences, 9 candidates of technical sciences.

Oleh Petrovych Mysov

Oleh Petrovych Mysov

Head of the Department, associate professor, candidate of technical sciences

 In 1972, he graduated from the Moscow Power Engineering Institute, specializing in Automation and Telemechanics, and received a qualification as an electrical engineer.

In 1994, at the Ukrainian Chemical Technology University (Dnipropetrovsk), he defended a dissertation for a Candidate of Technical Sciences degree on the topic “Plasma-chemical process of production of zinc oxide-based material for high-nylon ceramics” in the direction 05.17.01 – Technology of inorganic substances. The scientific supervisor was Doctor of Technical Sciences, Professor of the Department of Technology of Inorganic Substances of the Ukrainian Chemical Technology University V.D. Parkhomenko. In 2003, he was awarded the title of associate professor of the department of automation of production processes.

From September 2000 to 2016, he was the head of the Department of computer-integrated technology and metrology, and since 2018 he has been the head of the Department of Computer-Integrated Technologies and Automation.

Lecture courses:

 

Main directions of scientific activity:

  • Inorganic matter technology
  • Optimization of technological processes
  • Thermodynamics of technological processes

He served as the scientific leader of research topics:

  • 2013-2014 – “Development of scientifically substantiated recommendations for implementation of the system of environmental monitoring of a water facility – the river Dnipro for PJSC DMKSD”;
  • 2013-2016 – “Physico-chemical bases of synthesis of photonic crystals by self-assembly method”.

Publications:  is the author and co-author of more than 50 scientific publications published in the leading international and domestic professional editions, 15 certificates of authorship and patents, 2 textbooks, more than 30 educational and methodical publications, participation and publication of abstracts in 15 conferences.

Bibliometric profile in scientific bases and registers:    

Postgraduate management:  1 postgraduate student is supervised

Valerii Ivanovych Korsun

Valerii Ivanovych Korsun

Professor, Doctor of Technical Sciences

In 1971, Valerii Ivanovych Korsun graduated from the Faculty of Physics and Technology of the Dnieper National (then – Dnepropetrovsk State) University with a degree in automatic control systems, obtaining the qualification of an electrical engineer, and entered the full-time graduate school of the Faculty of Mechanics and Mathematics of this university (since 1972 – mathematical) cybernetics.

In 1977, in the specialized scientific council of the Sevastopol instrument-making Institute Valerii Ivanovych Korsun defended his dissertation on the topic “Development and research of methods of adaptive identification of control objects“, specialty Technical Cybernetics and Information Theory.

In 1999, he defended his doctoral dissertation on “Methods and systems of adaptive identification and control of technological processes using the principles of symmetry” in the specialized scientific council of Kharkiv National (at that time – state) University of Radio Electronics, specialty Control Systems and Processes.

In 1982, he was awarded the academic title of associate professor at the Department of “Applied Mathematics and Technical Cybernetics”, and in 2002 – the academic title of professor at the Department of “Systems Analysis and Management”.

Valerii I. Korsun has worked in the following positions:

  • Junior and senior researcher of SRS of Dnipropetrovsk State University (from 01.09.1974 – to 05.05.1978);
  • Assistant of the Department of Fundamentals of Automation of Dnipropetrovsk Institute of Chemical Technology (from 06.05.1978 – to 15.12.1979);
  • Associate Professor of “Applied Mathematics and Technical Cybernetics” and “Management in Technical Systems” of the Dnepropetrovsk Mining Institute (from 16.12.1979 – to 31.08.2000);
  • Acting Head of the Department, which was called “Applied Mathematics and Technical Cybernetics” (from 01.03.1985 – to 25.05.1985)
  • Professor of the department “Management in Technical Systems” (from 01.09.1995 – to 31.08.1997);
  • Head of the department, which at different times had the names: “electrical engineering”, “electrical engineering and metrology”, “metrology and information and measurement technologies” (from 01.02.2002 – to 03.07.2019).

The name of prof. Valerii Ivanovych Korsun is well known in Ukraine and in the world. His work in the scientific and educational fields is discussed in the publications:

  • the article “Scientific school for optimization and identification of dynamic systems” / Bulletin of the University of Dnepropetrovsk.
  • Rocket and space technology. Issue 5. D .:, Dnipro Publishing House. un-ta. 2001.- P.110-118;
  • “National Mining University. Professors 1899-2002 ». D .: RVC NSU, 2002;
  • “Encyclopedia of modern Ukraine. Volume. 15 ». K., 2014;
  • “Scientists of Ukraine are the elite of the state. Volume. 3 ».- K .: Lotus Ukraine, 2014.-P.179;
  • “Chronicle of achievements of modern Ukraine:” Successful professionals of Ukraine “. K .: Alfa-Vita, 2016.- P.72-73;
  • “Scientists of Ukraine are the elite of the state. Volume. 5 “(Section” Scientific Schools “). K .: Lotus Ukraine, 2017.- P.91;
  • “Chronicle of modern science and education of Ukraine: Scientific schools, author’s systems, and concepts” / Ed. board of VG Flint, VI Луговий, О.М. Topuzov [etc.]. – K .: Alfa-Vita, 2018.- P.61;

“Oles Honchar Dnipro National University. History. The present. Graduates”. Historical anniversary edition dedicated to the 100th anniversary of DNU. (Section “Alumni – the pride of Alma Mater”). K .: Chronicle, 2018.- P. 258-259.

Information about Valerii I. Korsun, as a scientist with significant achievements, is included in the database of the Texas Institute of Science, which consists of the names of famous scientists of today. This database is used by the staff of this institute to create temporary research teams that solve complex scientific and scientific-technical problems in the world.

Lecture courses:

  • mathematical foundations of systems theory;
  • modern management theory.

Main directions of scientific activity:

  • development of methods and systems of adaptive identification and metrology of dynamic measurements;
  • modification of methods for finding global extrema of multimodal functions based on the use of the concept of symmetry.

Valerii I. Korsun is Academician of the International Academy of Standardization (since February 22, 2011); Academician of the Academy of Technical Sciences of Ukraine (since July 1, 2019).

He is the founder and head of the scientific school “Symmetry in the problems of adaptive identification and metrology” (Awarded the Diploma of the Presidium of the Academy of Pedagogical Sciences of Ukraine “For significant contribution to the development of scientific schools of Ukraine”).

Valerii I. Korsun is a member of the editorial boards of the collection of scientific works “Adaptive automatic control systems” of NTUU “Kyiv Polytechnic Institute” and “Collection of scientific works of the Odesa State Academy of Technical Regulation and Quality”.

From 2000 to 2019, he was a member of specialized scientific councils for the defense of doctoral and master’s theses in “Automation of control processes” (NTU “DP”, Dnipro), “Instruments and methods for measuring mechanical quantities” and “Standardization, certification, and metrological support” (ODATRTAYA, Odesa), “Mathematical modeling and computational methods” (NMetAU, Dnipro).

Publications:

Valerii I. Korsun is the author of more than 300 scientific and scientific-methodical works, including 2 monographs, 3 textbooks, 3 copyright certificates of the USSR, and 3 patents of Ukraine and Russia for inventions. Under his supervision 5 candidate dissertations were defended, several dissertations for preparation of scientific degrees of the candidate and the doctor of technical sciences are prepared.

 Bibliometric profile in scientific bases and registers:

Lev Dmytrovych Chumakov

Lev Dmytrovych Chumakov

Professor, Senior Researcher, Doctor of Technical Sciences

 In 1962, he graduated from the Moscow Aviation Institute in the field of “Aircraft Instrumentation” and received a qualification as an engineer-electromechanic.

 In 1971, at the Dnepropetrovsk State University he defended his thesis for a candidate’s degree in engineering sciences on the theme “Optimization of periodicity control of the technical condition of missile systems systems” in the direction of 05.07.02 – Designing of aircraft. The scientific supervisor was the academician of the Academy of Sciences of Ukraine, Doctor of Technical Sciences, Rector of  Dnipropetrovsk State University V.I. Mossakovsky.

 In 1978, according the decision of the Presidium of the Academy of Sciences of the USSR he was awarded the academic rank of Senior Researcher. In 1996, at the Dnipropetrovsk State University, he defended his dissertation for the degree of Doctor of Technical Sciences on the theme “Development of assessment methods for designing operational characteristics of rocket systems with combined control of technical condition and aggregative repair of systems” in the direction of 05.07.02 – Designing of aircraft.

 

Information about Lev Dmytrovych Chumakov is also contained in the following editions:

 

  • Encyclopedia “Rocket and Space Technology”, Scientific Publishing House of the International Encyclopedia “Humanistics”, Moscow: St. Petersburg: 1999.
  • Who’sWho in the World, 19-21 editions, 2002-2004;
  • Who’sWho in Science and Engineering, 7 edition, 2003-2004.

Work experience:

  • Engineer (Design Bureau “Southern”, Dnipropetrovsk, 1962-1967);
  • postgraduate student, junior researcher (Dnipropetrovsk branch of the Institute of Mechanics of the Academy of Sciences of Ukraine, 1967-1974);
  • Senior Researcher, Head of the Department (Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and National Academy of Sciences of Ukraine, 1974-1991);
  • Director of the Pridniprovsky Scientific Center of NAS of Ukraine and the Ministry of Education and Science of Ukraine (1991-2009);
  • Professor of the Department of Specialized Computer Systems (Ukrainian Chemical Technology University, 2009-2010);
  • Head of the Department of Specialized Computer Systems (Ukrainian Chemical Technology University, 2010-2015)

Since 2018, he is a Professor of the Department of Computer-Integrated Technology and Automation.

Lecture courses:

  • Reliability and diagnosis
  • Methodology and organization of scientific research

Main directions of scientific activity:

  • Reliability and efficiency of complex technical systems
  • Information technology development
  • Methodology of designing the processes of operation of complex technical complexes
  • Research of scientific and technical potential

He worked on the academic topics of fundamental research, was a research supervisor and responsible executor of a number of research topics that were conducted under the direction of policymakers.

He was the scientific leader of the scientific theme: “Researching ways of using information and computer technologies in solving regional problems” from 01.2012 (state registration number 0112U004341).

Publications: he is the author and co-author of more than 290 scientific publications in leading international and domestic professional editions, including 5 monographs, 1 state standard, 3 brochures, 6 programs and concepts for solving regional problems, 2 textbooks, more than 10 educational and methodical editions, abstracts reports at the 1st International Congress (Greece) and 27 conferences of different levels.

 Bibliometric profile in scientific bases and registers:

Olena Vasylivna Titova

Olena Vasylivna Titova

Scientific secretary of the Department, associate professor, candidate of technical sciences

In 2004, she graduated from the Faculty of Mechanics of Ukrainian State University of Chemical Technology in the specialty “Automated Process Control” and received the qualification of a researcher engineer.

In 2007, she defended a dissertation for the degree of a candidate of technical sciences on the topic “Process and equipment of fine crushing of pigments and fillers for paint and varnish industry” in the direction 05.17.08 – Processes and equipment of chemical technology at SHEI USUCT. In 2013, she was awarded the title of Associate Professor of the Department of Computer-Integrated Technologies and Metrology.

In the academic year 2013/2014, she held the position of academic secretary of the Mechanical faculty of SHEI USUCT. Since 2018, she has been acting as a scientific secretary of the Department of Computer-Integrated Technology and Metrology.

Lecture courses:

  • Experimental research of systems
  • Identification and modeling of technological objects
  • Numerical methods and simulation on a computer

Main directions of scientific activity:

  • Creation of the microprocessor based on the Arduino platform with interface programming
  • Development of methodology for creation and increase of efficiency of computer-integrated control systems

Publications:  is a co-author of more than 30 scientific publications published in the leading national professional editions, 2 patents, 1 textbook with a stamp of the Ministry of Education and Science, more than 20 educational and methodical publications, participation in the publication of abstracts in more than 15 conferences, one of which is the International Conference NATO.

 Bibliometric profile in scientific bases and registers:    

Gennadii Ivanovych Manko

Gennadii Ivanovych Manko

Associate professor, candidate of technical sciences

In 1971, he graduated from the Faculty of Physics and Technology of the Dnepropetrovsk State University in the specialty “Systems of Automatic Control” and received the qualification of an engineer-electromechanic. Worked as an engineer at CB “Yuzhnoye” in a complex of tests. From 1974 to 1985, he worked as a senior engineer of the research sector of the Dnipropetrovsk Chemical-Technological Institute.

He graduated from correspondence postgraduate study at the Moscow Chemical Technology Institute. In 1984, he defended a dissertation for the degree of a candidate of technical sciences on the topic “Mathematical and algorithmic support for the synthesis of optimal chemical-technological systems with the use of information efficiency criteria” in the direction 05.13.08 – Automated systems for processing information and management in the chemical and petrochemical industry. Scientific advisers: Doctor of Chemical Sciences, Professor of Russian Chemical Technology University in Moscow, member of the Academy of Sciences of the USSR VV Kafarov  and Doctor of Technical Sciences, Professor, Academician of the Russian Academy of Sciences VP Meshalkin .

From 1985 to 1992, he  worked as a senior researcher at the Research and Design Institute of Automation of Ferrous Metallurgy. In 1999, he received the academic degree of the Associate Professor at the Department of Technological Process Automation of the Ukrainian State Chemical-Technological University.

Lecture courses:

  • Theory of information
  • Analog and digital measuring devices
  • Basics of computer-integrated management
  • Modern problems of automated control
  • Information theory of measurement

Main directions of scientific activity:

  • Synthesis of highly effective chemical and technological systems
  • Information characteristics of measuring instruments
  • Use of informational approach in estimating uncertainty of measurements
  • Information characteristics of the quality of development of control actions by automatic control systems

Publications: the author and co-author of nearly 30 scientific papers published in leading international and domestic professional publications, 2 inventions, one textbook stamped MES, more than 30 teaching publications, participation and publication of abstracts in 32 conferences.

Bibliometric profile in scientific bases and registers:

 Bibliometric profile in scientific bases and registers:   

Vladyslav Yakovych Trishkin

Vladyslav Yakovych Trishkin

Associate professor, candidate of technical sciences

 

In 1962, he graduated from the Dnipropetrovsk Chemical Technology Institute in the specialty “Automation of production processes” and received the qualification of a mechanical engineer.

In 1973, he defended a dissertation for the degree of a candidate of technical sciences at the Dnepropetrovsk Chemical Technology Institute on the topic “Investigation of the synthesis of ethylchlorosilanes and the development of an automatic control system” in the direction 05.13.07 – Automatic control of technological processes in the chemical industry. Scientific supervisor – Doctor of Technical Sciences, professor of the State Research Institute of Chemistry and Technology of Organometallic Compounds S.A. Holubtsov.

He is a member of the editorial board of the scientific journal “Automatics. Automation. Electrical complexes and systems”.

From 1982 to 2001 he was the head of the department of automation of production processes (now computer-integrated technologies and metrology).

Lecture courses:

  • Metrology, technological measurements and devices
  • The theory of adaptive and optimal systems
  • Fundamentals of metrological support
  • Theoretical metrology
  • Fundamentals of modern metrology

Main directions of scientific activity:

  • Optimal management of distributed systems with moving sources
  • Chemical metrology

From 2011 till 2015, he was the scientific leader of the research theme “Development and research of computer-integrated control systems”.

Publications:  he is the author and co-author of more than 70 scientific publications published in the leading international and domestic professional editions, more than 30 certificates of authorship and patents, 1 monograph, 2 textbooks with a stamp of the Ministry of Education and Science of Ukraine, more than 50 educational and methodical publications.

Bibliometric profile in scientific bases and registers: 

Management of postgraduate students:  1 candidate’s dissertation is under the guidance, 1 post-graduate student works.

 

 

Oleksandr Pavlovych Klymenko

Oleksandr Pavlovych Klymenko

Associate professor, candidate of technical sciences

In 1977, he graduated from Dnipropetrovsk Metallurgical Institute in the specialty “Metal Working Pressure” and received the qualification of a metallurgist engineer.

In 1986 he defended a dissertation for the degree of a candidate of technical sciences on the topic “Spheroidizing processing of weighty riots in the field of cold plowing” for the direction of 05.16.01 – metallurgy and thermal processing of metals. Since 1987 worked as a research assistant at the Department of Thermal Treatment of Metals of the Dnepropetrovsk Metallurgical Institute (now – National Metallurgical Academy of Ukraine), and from 2015 – Associate Professor of the Department of Computer-Integrated Technologies and Metrology

Lecture courses:

  • Automation of production processes
  • Control and control of machines and apparatuses of chemical production
  • Automation and process control systems
  • Automated control systems for technological processes in power engineering
  • Thermotechnical measurements and devices
  • Automation in mechanical engineering

Main directions of scientific activity:

  • Development of techniques for the study of phase and magnetic transformations in steels and alloys
  • Development of management processes of heat treatment of steels based flow control processes polimorfnyh and magnetic transformations

Publications:  has authored or co-authored more than 120 scientific papers published in leading international and domestic professional publications, 17 patents, 2 monographs, 1 textbook, more than 10 teaching publications, participation and publication of abstracts in more than 10 conferences .

Bibliometric profile in scientific bases and registers:

 Ihor Leonidovych Levchuk

Ihor Leonidovych Levchuk

Associate Professor, Candidate of Technical Sciences, Dean of the Faculty of Computer Science and Engineering

In 1999, he graduated from Ukrainian State University of Chemical Technology, specializing in “Automated control of technological processes and production” and received a qualification of a specialist in automation and computer-integrated technologies.

In 2013, at the National Mining University (Dnipropetrovsk) defended a dissertation for the degree of a candidate of technical sciences on the topic “Optimal control of the process of catalytic reforming in obtaining a high octane component of gasoline” in the direction 05.13.07 – Automation of control processes. Scientific supervisor – candidate of technical sciences, associate professor of the department of computer-integrated technology and metrology  V.Ya. Trishkin. In 2015, he received the academic rank of associate professor of the Department of Computer-Integrated Technology and Metrology.

In 2015, he worked as deputy Dean of the Faculty of Computer Science and Engineering, and since 2016, he has been holding the post of Dean of the same faculty.

Lecture courses:

  • Automated process control systems
  • Microprocessor and software automation
  • Programming of ACC TP facilities

Main directions of scientific activity:

  • Modeling and optimal control based on mathematical models
  • Manage objects with distributed parameters
  • Managing with Movable and Distributed Controls
  • Neural networks and technologies based on automation
  • Mathematical, software, informational support of ASTCP

Publications:  is the author and co-author of more than 20 scientific publications published in the leading international and domestic professional editions, 2 patents, more than 20 teaching and methodical publications, participation and publication of abstracts in 10 conferences.

Bibliometric profile in scientific bases and registers:

 Natalia Oleksandrivna Minakova

Natalia Oleksandrivna Minakova

Associate professor, candidate of technical sciences

 

In 2003, she graduated from the Faculty of Silicates Technology of Ukrainian State University of Chemical Technology in the specialty “Chemical Technology of Refractory Non-Metallic and Silicate Materials” and received a Master’s Degree in Chemical Technology and Engineering. The second higher education she received in 2017 at Ukrainian State University of Chemical Technology in the specialty “Automation and Computer-Integrated Technologies” and has the qualification of a specialist in the automated control of technological processes.

In 2006, at Ukrainian State University of Chemical Technology she defended a dissertation for the degree of a candidate of technical sciences on the topic “Unbounded titanium enamels” in the direction 05.17.11 – Technology of refractory nonmetallic materials. Scientific supervisor – doctor of chemical sciences, professor of the chair of chemical technology of ceramics and glass, honored worker of science and technology of Ukraine, advisor of rector  Ya.I. Bilyi . In 2013, she was awarded the title of Associate Professor of the Department of Computer-Integrated Technologies and Metrology of the SHEI USUCT.

Lecture courses:

  • Fundamentals of automated design systems
  • Automation of technological processes
  • Automatic regulation and control of technological processes
  • Control and management of chemical and technological processes

Main directions of scientific activity:

  • Development of the method of determining the coil characteristics of enamel coatings using modern controllers
  • Development of scientific fundamentals of synthesis without fluorides without boron coating enamels with reduced firing temperature

Publications:  is the author and co-author of more than 50 scientific publications published in the leading international and domestic professional editions, 20 certificates of authorship and patents, more than 10 educational and methodical publications, participation and publication of abstracts at nearly 50 international conferences.

Bibliometric profile in scientific bases and registers:   

Olha Oleksandrivna Fursa

Olha Oleksandrivna Fursa

Associate professor, candidate of technical sciences

In 2006, she graduated from the Faculty of Organic Substances Technology of Ukrainian State University of Chemical Technology in the specialty “Technology of Polymer Processing” and received the qualification of a specialist in technology of polymer processing. The second higher education she received in 2011 at the Faculty of Biotechnology, Computer Science and Engineering of the Ukrainian State Chemical-Technological University in the specialty “Automated control of technological processes” and has the qualification of a specialist in the automated control of technological processes.

In 2013, at SHEI USUCT she defended a dissertation for the degree of a candidate of technical sciences on the topic “Elastomeric compositions based on general-purpose rubber and crushed vulcanizate modified with nitrogen-containing compounds” in the direction 05.17.06 – Technology of polymeric and composite materials. Scientific supervisor – Doctor of technical sciences, professor of the department at SHEI USUCT Yu.M. Vashchenko . In 2016, she was awarded the title of Associate Professor of the Department of Computer-Integrated Technologies and Metrology of the SHEI USUCT.

Acting deputy secretary of the Admissions Committee of the c from 2013 to 2015 and from 2017 to 2018.

Lecture courses:

  • Control and management of chemical and technological processes
  • Standardization, metrology, certification and quality management
  • Metrology and standardization
  • Automation of chemical and technological processes
  • Automatic regulation and management of chemical and technological processes

Main directions of scientific activity:

  • Calculation and software simulation of ACCT for different purposes
  • Development of methods for the synthesis of polymeric materials, nano-and microcomposites

Publications:  is the author and co-author of more than 40 scientific publications published in the leading international and domestic professional editions, more than 10 educational and methodical publications, and actively participated in more than 20 conferences.

Bibliometric profile in scientific bases and registers:  

Dmytro Anatoliiovych Losikhin

Dmytro Anatoliiovych Losikhin

Senior Lecturer

In 1989, he graduated from the Faculty of Mechanics of Ukrainian State University of Chemical Technology in the specialty “Automation and complex mechanization of chemical and technological processes” and received the qualification of an automation engineer. After graduation from the University, he worked as an engineer at the design institute “VNIPI Energoprom” at the automation department.

Since 1991, he has studied at the post-graduate course of Ukrainian State University of Chemical Technology. After graduation, he worked as an assistant at the Department of automation of production processes. Since 2000, he has been working as a senior lecturer at the Department of Computer-Integrated Technology and Metrology.

In 2009, he received a second higher education at the Faculty of Modern Technologies, specializing in Economics of Enterprise, and a specialist in economics.

Lecture courses:

  • Introduction to the theory of systems
  • System analysis of complex control systems
  • Microprocessor systems
  • Microprocessor technology
  • Information and measuring systems

Main directions of scientific activity:

  • System analysis
  • Management theory
  • Metrological support of systems
  • Programming

Publications:  author and co-author of more than 30 scientific works and educational-methodical publications, participation and publication of abstracts at 5 conferences.

Bibliometric profile in scientific bases and registers: 

Anton Romanovych Shaikus

Anton Romanovych Shaikus

Assistant, postgraduate student

In 2013, he graduated from the Faculty of Computer Sciences and Engineering of the Ukrainian State University of Chemical Technology, specializing in “Automated Control of Processes”, received a qualification as an engineer-researcher on automated control of technological processes, and began to work as an assistant at the Department of Computer-Integrated Technologies and Metrology.

From 2014 to 2017, he studied at the post-graduate course of the Department of Computer-Integrated Technologies and Metrology. He is currently working on a dissertation theme “Optimal control of heat and mass transfer processes with distributed control actions” under the guidance of a candidate of technical sciences, associate professor of Department of Computer-Integrated Technology and Automation V.Ya. Trishkin.

He conducts laboratory and practical training courses:

  • Control and management of chemical and technological processes
  • Automated process control systems
  • The theory of adaptive and optimal systems
  • Modern problems of automated control
  • Programming of ACC TP facilities

Main directions of scientific activity:

  • Problems of distributed management of chemical technology objects
  • Ways to increase the efficiency of iterative methods of calculation

Publications: the author and co-author of 10 scientific publications in professional publications, 8 educational publications, 2 patents, 11 abstracts of national and international conferences, 1 textbook.

 

Bibliometric profile in scientific bases and registers:

The educational process is provided by 3 employees of the Department, of which one is a laboratory assistant and 2 – engineers of the I category.


Tetiana Sergiivna Vasylieva

Tetiana Sergiivna Vasylieva

Head of the laboratory

In 1997, she graduated from the Faculty of Electrical Engineering of the Dnepropetrovsk State Mining Academy in the specialty “Computerized Control Systems and Automation” and received the qualification of an electrical engineer.

Since 2000, she has been working at the Department of Computer-Integrated Technologies and Automation of SHEI USUCT, since 2006 – Head of the Laboratory.

Valeii Ivanovych Skirko

Valeii Ivanovych Skirko

Engineer Category I

In 1992, he graduated from the mechanical faculty of the Dnepropetrovsk chemical-technological institute in the specialty “Automation and complex mechanization of chemical-technological processes” and received the qualification of an electrical engineer.

 He works at the Department of automation of production processes (now computer-integrated technologies and automation) since 1985, as a technician of the research sector, an educational master, an engineer of the I category.

He conducts laboratory and practical training courses:

  • Control and control of HTP
  • Fundamentals of Electronics
  • Metrological measurements
  • Measuring transducers

Since 2016, he hold extra curriculum classes at the Faculty of Computer Science and Electronics Engineering.

Oleksandr Vasyliovych Yevtushenko

Oleksandr Vasyliovych Yevtushenko

Engineer 1st Category

In 1983, he graduated from the Dnipropetrovsk Metallurgical Institute (department of electrometallurgy of steel and ferroalloys) in the specialty “Metallurgy of ferrous metals” and received the qualification of a metallurgist engineer.

 Since 2010, he has been working at the Department of Automation of Production Processes (now Computer-Integrated Technologies and Automation) at the Department of Engineering and Technology of USUCT as an Engineer of the 1st category.